PeakTech
 PeakTech
Prüf- und Messtechnik GmbH
Kornkamp 32
DE 22926 Ahrensburg

Phone: 0049 4102 42343/44
Fax: 0049 4102 43416

back

PeakTech® 5350 MVM Prod-Id: P 5350 MVM

PeakTech® 5350 MVM
Manual
Picture

2-channel, 100 µV ... 300 Vrms

This AC Level Meter can measure the AC signal in range of 100 µV ... 300 Vrms, and the level range is -80 dB ... +50 dB. The possible measuring range of frequency is 5 Hz ... 1 MHz for measuring the AF and LF range signal level. Two power source circuits, positive and negative are provided for very stable DC bias and recover from any overload in a very short time. Indirect attenuator switching by relay and FET switch provides higher reliability. The amplifier installed in the level meter has than 60 dB gain and 12 ranges.

  • dual channel version with two independent AC Voltmeter in a single cabinet.
  • FET- and relay controlled attenuator circuit for outstanding signal-to-noise ratio and excellent reliability.
  • BNC-Output
  • Use of output signal as reference signal for external amplifiers (max. of 60 dB in steps of 10 dB)
  • Safety: IEC-1010-1; CAT II
  • Accessories: power cord, Test leads with BNC-plugs, fuses (0,3 A) and manual

availability: ex stock

Ranges 1 mV -60 dB/3 mV -50 dB/10 mV -40 dB/30 mV -30 dB/0-100 mV -20 dB
1 mV -60 dB/3 mV -50 dB/10 mV -40 dB/30 mV -30 dB/0-100 mV -20 dB
0-300 mV -10 dB/0-1 V 0 dB/0-3 V +10 dB/0-10 V +20 dB/0-30 V +30
dB/0-100 V +40 dB/0-300 V +50 dB
Accuracy < ± 3 %
Frequency Response 5 Hz ... 1 MHz: ± 10 % / 10 Hz ... 500 kHz: ± 5 % / 20 Hz ... 200 kHz: ± 3 % / 30 Hz ... 100 kHz: ± 1 % ( at 1 kHz)
Max. Input Voltage 500 V DC or ACpp in ranges 1 ... 300 V; 100 V DC or ACpp in ranges 1 ... 300 mV
Input Impedance 40 MΩ ± 5 %; < 45 pF
Crosstalk < -50 dB (at 600 Ω)
Amplifier Output
Amplification approx. 60 dB
Output Voltage 1 Vrms ± 20 %
Output Impedance 600 Ω ± 20 %
Frequency Response 5 Hz ... 500 kHz: < ± 3 dB
Signal-to-noise ratio > 40 dB
Operating Voltage 230 V, 50 Hz
Dimensions (WxHxD) 135 x 200 x 240 mm
Weight 2,4 kg