«PeakTech® P 1885» Laboratory power supply DC 1 - 40V / 0 - 5A with USB

€369.90*

Prices excl. VAT plus shipping costs and possibly lower value surcharge

PDF Datasheet

Product number: P 1885

EAN: 4250569400384

Downloads

Product information "«PeakTech® P 1885» Laboratory power supply DC 1 - 40V / 0 - 5A with USB"

The PeakTech 1885 is a programmable laboratory power supply for a maximum of 40V / 5A DC, i.e. 200 W continuous power. In addition to presets for current and voltage values, time programs with intervals and the number of runs can also be created directly on the device or using the included PC software. For operation with a PC, the switching power supply is equipped with a USB and RS-485 interface. A PC connected to the RS-485 interface enables the control of up to 32 power supplies. A USB interface on the back of the device connects to a Windows PC. The intelligent fan control adjusts the speed of rotation to the respective temperature and output power. The output voltage and current limit can also be set in the open circuit without a connected load. Due to its high reliability and the programming functions, this power supply series is ideal for professional users from industry, control and regulation technology or the electronics laboratory.

USB:	■
Channels:	1 CH
Display Type:	LCD
Input connector:	IEC socket
Input voltage:	100 - 240 VAC 50/60 Hz
Output Connection:	4 mm Plug
Output Current:	0 - 5 A
Output Voltage:	1 - 40 V DC
RS-485:	■

DC laboratory switching power supply with max. 40 V / 5 A
Multi-line LCD display with backlight
4 mm safety sockets for connecting a consumer
USB and RS-485 interface for connection to the PC
Freely adjustable presets for current and voltage values
Freely adjustable time programs and cycle times
Display of setpoint and real value for voltage and current
Watt display for current output power
Short circuit; Overload and overtemperature protection
Safety: EN 61010-1
Accessories: USB cable, RS-485 connector, software CD for Windows, power cord and manual

Zubehör / Accessories:

«PeakTech® NK / EU-ST» IEC connection cable Length: 1.5m black 10-16 A / 250 V

Connection cable for devices with EU plug

€4.90*

«PeakTech® NK / UK-ST» IEC connection cable, length: 1.8m, UK plug, 250 V / 60 Hz; 5 A

Connection cable for devices with UK plug

€7.90*

«PeakTech® NK / US-ST» device connection cable according to US standard, type Feller 498 G / C13, 125 V AC / 10A

Connection cable for devices with US plug

€7.90*

«PeakTech® P 7000» Tapping clamps for Digital Multimeter up to 10 A

These measuring accessories with 4 mm sockets can be connected to almost all measuring devices. Thanks to its hook-shaped alligator clips, it is possible to carry out measurements even in hard-to-reach points on a circuit. A maximum of safety is achieved by the double insulation of the lines and the protection against accidental contact with conductive metal parts when closed. This makes these accessories ideal for use in training and service.

€16.70*

«PeakTech® P 7005» Test Leads for Digital Multimeter with extension

This measuring accessorie with 4 mm sockets can be connected to almost all measuring devices and power supplies. With the extension adapters, it is possible to connect the test leads to other test leads in order to carry out measurements over long distances. The safety of these measuring wires is ensured by the double insulation of the lines and the contact protection against conductive metal parts. This makes these accessories ideal for use in training and service.

€8.90*

«PeakTech® P 7015» Alligator clamps for Digital Multimeter

The alligator clips enable safe measurements even on bare or exposed cables. With their 4 mm sockets, they can be used for almost any multimeter and measuring device. A maximum of safety is achieved by the protection against against accidental contact with conductive metal parts. This makes these accessories ideal for use in training and service.

€8.90*

«PeakTech® P 7020» Test Leads for Digital Multimeter

This measuring accessorie with 4 mm sockets can be connected to almost all measuring devices and power supplies. A maximum of safety is achieved by the double insulation of the wires and the protection against accidental contact with conductive metal parts when closed. This makes these accessories ideal for use in training and service.

€6.90*

«PeakTech® P 7025» Test Leads for Digital Multimeter with coupling

These test leads with 4 mm sockets have a coupling, which makes it possible to connect other test leads to them. The safety of these measuring wires is ensured by the double insulation of the lines and the contact protection against conductive metal parts. This makes these accessories ideal for use in training and service.

€6.90*

«PeakTech® P 7046» Set of 4 Test Leads (25cm) for Laboratory Power Supplies

Set of four connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups in red, black, blue, and yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€7.00*

«PeakTech® P 7047» Set of 4 50cm Test Leads for Laboratory Power Supplies

€8.00*

«PeakTech® P 7048» Set of 4 Test Leads (75cm) for Laboratory Power Supplies

€10.00*

«PeakTech® P 7049 BLACK» Testkabel 100 cm (Farbe: schwarz)

Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups. These cables are black. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.75*

«PeakTech® P 7050» Set of 4 Test Cables, 150cm, for Laboratory Power Supplies

€12.00*

«PeakTech® P 7051» Set of 4 Test Cables, 200cm, for Laboratory Power Supplies

€13.00*

«PeakTech® P 8200» Measuring Accessories Set

This extensive collection of test accessories for the electronics area provides the best suitable measuring adapter for the desired application for each digital multimeter. In addition, these high quality clips and cables are all manufactured to the latest safety standards and provides a high safety in every application for the user. For the material, a flexible plastic was chosen, which can also withstand the hardest kinds of usage.

€45.90*

«PeakTech® P 8201» Measuring Accessories Set with 4mm Plugs

The PeakTech 8201 accessory set was specially put together for the training and laboratory area and includes a practical collection of 4 mm cables with banana plugs, test probes and connection terminals which are ideal for connecting electronic loads and laboratory power supplies. The double-insulated plastic parts are made of flexible and durable material.

€49.90*

«PeakTech® P 8202» Set of laboratory cables with 4mm banana plugs

These high-quality connection cables with 4mm banana plugs are the perfect addition for use with laboratory power supplies in the SELV/PELV range. The robust banana plugs fit into all standard 4mm sockets and enable a secure and reliable connection. The coupling socket on the rear allows an additional cable with a 4mm plug to be inserted, which increases flexibility and application versatility. The set consists of four colour-coded cables in red, black, blue and yellow, ensuring easy assignment and clarity. These connection cables not only offer excellent conductivity and durability, but are also easy to handle and versatile. They are ideal for professional use in the laboratory, but are also a valuable aid for the ambitious hobby electronics engineer. This comprehensive set is sufficient for a complete laboratory workstation and contains a total of 24 laboratory cables - 4 cables each of 25cm, 50cm, 75cm, 100cm, 150cm and 200cm.

€49.90*