"PeakTech® P 5602" Additional camera with 3 metre gooseneck for PeakTech 5600
€59.00*
Flexible accessory camera with 3m length, suitable for the PeakTech 5600 video endoscope camera with 5 pin camera connection.
«PeakTech® P 1040» TrueRMS Digital Multimeter 2000 Counts, Man. Range
€26.90*
The new PeakTech 1040 is a compact TrueRMS multimeter in a sturdy housing for use in the electrical craftsmanship. Despite its small size, this new development offers all important measuring functions, such as direct and alternating voltage measurements up to 600V, direct and alternating current measurements up to 10 A, resistance measurements, continuity tester and diode test as well as a practical battery test function for 9V or 1,5V batteries. The manual range selection enables a very fast reaction time and the measured values can be easily read in the display. The safety of the user is guaranteed by the overvoltage category III up to 600 V and the double-insulated housing, whereby the batteries and the high-quality ceramic fuses are quickly accessible for a change via the battery compartment on the back of the device.
«PeakTech® P 1041» TrueRMS Digital Multimeter 4000 Counts, Auto.Range
€37.90*
The new PeakTech 1041 is a compact TrueRMS multimeter in a sturdy housing for use in the electrical craftsmanship. Despite its small size, this new development offers all important measuring functions, such as direct and alternating voltage measurements up to 600V, direct and alternating current measurements up to 10 A, resistance measurements, continuity tester and diode test as well as a practical battery test function for 9V or 1,5V batteries. In addition, this model offers frequency measurement, capacitance measurement and a non-contact voltage detector. The measuring range is selected automatically with this device, which guarantees particularly easy handling and measured values can be easily read on the illuminated display. Single-pole phase tests can be carried out with the LIVE function. The safety of the user is guaranteed by the overvoltage category III up to 600 V and the double-insulated housing, whereby the batteries and the high-quality ceramic fuses are quickly accessible for a change via the battery compartment on the back of the device.
«PeakTech® P 1400» 5 MHz / 2CH, 100 MS/s Digital storage oscilloscope
€150.00*
Specially developed for the education and hobby sector, this new series of fully-fledged digital storage oscilloscopes offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control.
«PeakTech® P 1401» 10 MHz / 2CH, 100MS/s Digital storage oscilloscope
€165.00*
Specially developed for the education and hobby sector, this new series of fully-fledged digital storage oscilloscopes offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control.
«PeakTech® P 1402» 20 MHz / 2CH, 250MS/s Digital storage oscilloscope
€185.00*
Specially developed for the education and hobby sector, this new series of fully-fledged digital storage oscilloscopes offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control.
«PeakTech® P 1403» 50 MHz / 2CH, 500MS/s Digital storage oscilloscope
€235.00*
Specially developed for the education and hobby sector, this new series of fully-fledged digital storage oscilloscopes offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control.
«PeakTech® P 1404» 100MHz / 2 CH, 1 GS/s Digital storage oscilloscope
€260.00*
Specially developed for the education and hobby sector, this new series of fully-fledged digital storage oscilloscopes offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control.
«PeakTech® P 2030» True RMS 1000V Digital Multimeter 6000 Counts
€65.90*
The new PeakTech 2030 was developed for professional use and offers a multitude of measuring functions for electrical measured values for every user from industry, craftsmanship, training and the laboratory. It was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with bar graph and 61 segments. The automatic range selection offers a very user-friendly operation and measured values can be easily read on the permanently illuminated display. It supports measurements for DCV, ACV, DCA, ACA, LowZ ACV, Ohm, Cap, Hz, °C, °F, diode or continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.
«PeakTech® P 2035» True RMS 1000V Digital Multimeter 6000 Counts, USB
€75.90*
The new PeakTech 2035 was developed for professional use and offers a multitude of measuring functions for electrical measured values for every user from industry, craftsmanship, training and the laboratory. Particularly noteworthy is the integrated data interface, which enables this model to record long-term data with the PC software. It was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with bar graph and 61 segments. The automatic range selection offers a very user-friendly operation and measured values can be easily read on the permanently illuminated display. It supports measurements for DCV, ACV, DCA, ACA, LowZ ACV, Ohm, Cap, Hz, °C, °F, diode or continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.
«PeakTech® P 2040» True RMS 1000V Digitalmultimeter 20000 Counts, USB
€105.90*
The new PeakTech 2040 was developed for professional use and offers a multitude of measuring functions for electrical measured values for every user from industry, craftsmanship, training and the laboratory. Particularly noteworthy is the integrated data interface, which enables this model to record long-term data with the PC software. It was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 20.000 Counts and bar graph. The automatic range selection offers a very user-friendly operation and measured values can be easily read on the permanently illuminated display. It supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode or continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.
«PeakTech® P 3349» TrueRMS digital multimeter 6000 Counts, Man. Range
€41.90*
The new PeakTech 3349 was specially developed for use in the craftsmanship and industry and offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight, which is used to illuminate the area where the measurement has to be taken. A multi-colored LED bar is located above the 6000-digit display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is found in NCV mode, yellow when measuring large capacities or flashes red when the phase tester mode is active (LIVE). In addition to the comprehensive measuring functions for current & voltage (True RMS), capacitance, resistance, frequency, continuity test and diode test, this device owns the functions to perform temperature measurements, non-contact voltage tests and phase tests. With the relative value mode and the data hold function, it is possible to make measurements accurate and precise.
The PeakTech 3349 was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with rubber coating, a tilt stand on the back, which can be removed to replace the batteries. The fuses are located underneath the stand as well, if it is neccessary to replace these. With this device the measuring range is selected manually, which enable particularly fast response times.
«PeakTech® P 3350» TrueRMS digital multimeter 6000 Counts, Auto Range
€47.90*
The new PeakTech 3350 was specially developed for use in the craftsmanship and industry and offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight, which is used to illuminate the area where the measurement has to be taken. A multi-colored LED bar is located above the 6000-digit display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is found in NCV mode, yellow when measuring large capacities or flashes red when the phase tester mode is active (LIVE). In addition to the comprehensive measuring functions for current & voltage (True RMS), capacitance, resistance, frequency, continuity test and diode test, this device owns the functions to perform temperature measurements, non-contact voltage tests and phase tests. With the relative value mode and the data hold function, it is possible to make measurements accurate and precise.
The PeakTech 3350 was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with rubber coating, a tilt stand on the back, which can be removed to replace the batteries. The fuses are located underneath the stand as well, if it is neccessary to replace these. With this device the measuring range is selected automatically, which enable particularly fast response times.
«PeakTech® P 3432» Fuse finder with RCD tester
€49.90*
The new PeakTech 3432 is a measuring device with which it is possible to detect fuses in a circuit. It consists of a combination of a transmitter and a receiver. The transmitter serves as a signal transmitter and the receiver is used to locate the fuse in the fuse box.
Furthermore, it is possible to detect voltages with the receiver by means of the NCV detector. RCD tests can be carried out with the transmitter by plugging the unit into a socket and pressing the RCD test button.
The functions of the PeakTech 3432 make it easy to find fuses in any application, making it an ideal companion for the electronics technician and the layman to find the right fuse and safely switch off the circuit that needs to be disconnected.
«PeakTech® P 3433» Digital Wall Scanner
€44.90*
The new PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, an LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.
The simple operation, safe application and high-quality workmanship makes this model an indispensable companion for every craftsman, handyman or installer for maintenance and all work in the building sector.
«PeakTech® P 4120 A» 1CH arbitrary function generator, 1 µHz - 5 MHz, 10W amplifier
€359.00*
This 1-channel arbitrary waveform generator with graphical user interface has excellent technical properties and a variety of functions. Particularly noteworthy is the easy operation via the various menu buttons, the multitude of integrated waveforms, the simple setting of new waveforms via the internal editor and the excellent price / performance ratio. This makes this generator perfect for almost all tasks in education, research and development. The PeakTech 4120 A has a 10W power amplifier, which is connected on the back via BNC sockets.
«PeakTech® P 4124 A» 2CH arbitrary function generator, 1 µHz – 10 MHz, 10W amplifier
€469.00*
This 2-channel arbitrary waveform generator with a graphical user interface has excellent technical properties and a variety of functions. Particularly noteworthy is the easy operation via the various menu buttons, the multitude of integrated waveforms, the simple setting of new waveforms via the internal editor and the excellent price / performance ratio. This makes this generator perfect for almost all tasks in education, research and development. The PeakTech 4124 A has a 10W power amplifier, which is connected on the back via BNC sockets.
«PeakTech® P 4935» Mini IR Thermometer -50°C ... +400°C ~ 12:1
€16.50*
The PeakTech 4935 is a handy infrared thermometer with an excellent price-performance ratio that uses a laser to measure surface temperatures quickly, easily and accurately. The laser can be aimed at hot surfaces or moving objects, allowing the operator to easily capture the temperatures to be measured from a safe distance. The device is activated by a trigger and carries out a precise (0.1°C resolution) temperature measurement in a flash. The three function keys next to the screen toggle between °C and °F, activate the laser and the backlight of the display.
«PeakTech® P 4940» Mini IR Thermometer -50°C ... +600°C ~ 12:1
€25.00*
The PeakTech 4940 is a handy infrared thermometer with an excellent price-performance ratio that uses a laser to measure surface temperatures quickly, easily and accurately. The laser can be aimed at hot surfaces or moving objects, allowing the operator to easily capture the temperatures to be measured from a safe distance. The device is activated by a trigger and carries out a precise (0.1°C resolution) temperature measurement in a flash. The three function keys next to the screen toggle between °C and °F, activate the laser and the backlight of the display.
«PeakTech® P 5305 A» 2 in 1 PH-Meter for PH/TEMP
€33.90*
This 2 in 1 PH meter with one-hand operation measures the pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids.
In addition, the liquid temperature is measured and displayed with simultaneous display of both measured values in the LCD display with permanent backlight.
Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH measurement and temperature measurement in °C or °F.
«PeakTech® P 5306» 3 in 1 PH-Meter for PH/EC/TEMP
€42.90*
This 3 in 1 PH meter with one-hand operation measures the pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids.
The conductivity EC in µS/cm is also precisely measured via two electrodes on the sensor head.
In addition, the liquid temperature is measured and displayed with simultaneous display of both measured values in the LCD display with permanent backlight.
Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC measurement and temperature measurement in °C or °F.
«PeakTech® P 5307» 4 in 1 PH-Meter for PH/EC/TDS/TEMP
€49.90*
This 4 in 1 PH meter with one-hand operation measures the pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids.
The conductivity EC in µS/cm is precisely measured via two electrodes on the sensor head and the TDS value for the total dissolved solids is also measured additionally.
In addition, the liquid temperature is measured and displayed with simultaneous display of both measured values in the LCD display with permanent backlight.
Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS measurement and temperature measurement in °C or °F.
«PeakTech® P 5310 A» PH Tester with external probe
€69.90*
This PH meter measures the PH value of aqueous liquids using a detachable probe-sensor for quick and accurate evaluation of the measurement results via the galvanic voltage difference between acidic, neutral and basic liquids at the tip of the immersion probe.
In addition, this device has two adjustment potentiometers for calibrating the pH4 or pH7 values, a suitable screwdriver and a neutralization liquid for the sensor with corresponding calibration solutions.
Measured values are clearly shown and can be read easily at the large LCD display with white backlight.
For steady use, this model is powered by a standard 9V battery.
Due to the handy design, the large display and the extensive range of accessories, this measuring device is particularly suitable for use in schools, training, science and research.
«PeakTech® P 5610 B» Thermal Imaging Camera 220x160px. -20°C ... +400°C
€479.00*
The PeakTech 5610 B is a versatile thermal imaging camera with a thermal resolution of 220x160 thermal pixels, which makes temperature differences easily recognizable for every user. Use this new developed device, for example, to detect thermal bridges in thermography, leaks in systems and pipe systems or trace heating pipes in walls and floors. In electrical engineering, this thermal imaging camera offers the possibility of finding contact problems and contact resistance, e.g. in sub-distribution boards, and thus preventing a fire hazard in good time. This device also has five different color palettes of thermal imaging, as well as five overlay modes for video or photo to thermal imaging, so the user can easily locate the source of the error in the real image or one of the image overlays. Analysis software is stored in the internal memory of the device and can therefore be installed on connected PCs at any time.