innovative
progressive
reliable
Filter
«PeakTech® MKS-1» BNC to 4 mm banana plug ~ measuring cable -100 cm length
Measuring cable, length 1 m BNC to 4 mm banana plug; Input resistance: 50 Ω Input capacitance: 105 pF; Max. measuring voltage: 50 V AC or 75 V DC

€9.90*
«PeakTech® P 7005» Test Leads for Digital Multimeter with extension
This measuring accessorie with 4 mm sockets can be connected to almost all measuring devices and power supplies. With the extension adapters, it is possible to connect the test leads to other test leads in order to carry out measurements over long distances. The safety of these measuring wires is ensured by the double insulation of the lines and the contact protection against conductive metal parts. This makes these accessories ideal for use in training and service.

€8.90*
«PeakTech® P 7020» Test Leads for Digital Multimeter
This measuring accessorie with 4 mm sockets can be connected to almost all measuring devices and power supplies. A maximum of safety is achieved by the double insulation of the wires and the protection against accidental contact with conductive metal parts when closed. This makes these accessories ideal for use in training and service.

€6.90*
«PeakTech® P 7025» Test Leads for Digital Multimeter with coupling
These test leads with 4 mm sockets have a coupling, which makes it possible to connect other test leads to them. The safety of these measuring wires is ensured by the double insulation of the lines and the contact protection against conductive metal parts. This makes these accessories ideal for use in training and service.

€6.90*
«PeakTech® P 7030» Test leads for laboratory power supplies
These test leads with 4 mm safety sockets each have a coupling, which makes it possible to connect other test leads to them. The safety of these measuring lines is ensured by the double insulation of the lines and the protection against accidental contact with conductive metal parts. As a result, this accessory is ideal for use in training and service.

€14.90*
«PeakTech® P 7035» Test leads for laboratory power supplies
These test leads with 4 mm banana plugs are for use in the SELV/PELV area and are therefore particularly suitable for laboratory power supplies. At the end of the lines there are crocodile clips for connection to the consumer. This accessory is ideal for use in hobby and teaching materials.

€9.90*
«PeakTech® P 7045» Leads for laboratory power supplies with coupling
These test leads with 4 mm banana plugs are for use in the SELV/PELV area and are therefore particularly suitable for laboratory power supplies. At both ends of these connection lines there are uninsulated 4mm banana plugs for connecting devices with 4mm sockets. This accessory is ideal for use in hobby and the educational area.

€9.90*
«PeakTech® P 7046 BLACK» Testkabel 25cm (Farbe: schwarz)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups. These cables are black. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€1.75*
«PeakTech® P 7046 BLUE» Testkabel 25cm (Farbe: blau)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, blue. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€1.75*
«PeakTech® P 7046 RED» Testkabel 25cm (Farbe: rot)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, in red. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€1.75*
«PeakTech® P 7046 YELLOW» Testkabel 25cm (Farbe: gelb)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€1.75*
«PeakTech® P 7046» Set of 4 Test Leads (25cm) for Laboratory Power Supplies
Set of four connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups in red, black, blue, and yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€7.00*
«PeakTech® P 7047 BLACK» Testkabel 50cm (Farbe: schwarz)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups. These cables are black. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.00*
«PeakTech® P 7047 BLUE» Testkabel 50cm (Farbe: blau)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, blue. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.00*
«PeakTech® P 7047 RED» Testkabel 50cm (Farbe: rot)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, in red. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.00*
«PeakTech® P 7047 YELLOW» Testkabel 50cm (Farbe: gelb)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.00*
«PeakTech® P 7047» Set of 4 50cm Test Leads for Laboratory Power Supplies
Set of four connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups in red, black, blue, and yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€8.00*
«PeakTech® P 7048 BLACK» Testkabel 75cm (Farbe: schwarz)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups. These cables are black. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.50*
«PeakTech® P 7048 BLUE» Testkabel 75cm (Farbe: blau)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, blue. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.50*
«PeakTech® P 7048 RED» Testkabel 75cm (Farbe: rot)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, in red. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.50*
«PeakTech® P 7048 YELLOW» Testkabel 75cm (Farbe: gelb)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.50*
«PeakTech® P 7048» Set of 4 Test Leads (75cm) for Laboratory Power Supplies
Set of four connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups in red, black, blue, and yellow. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€10.00*
«PeakTech® P 7049 BLACK» Testkabel 100 cm (Farbe: schwarz)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups. These cables are black. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.75*
«PeakTech® P 7049 BLUE» Testkabel 100 cm (Farbe: blau)
Set of 10 connecting cables with 4mm banana plugs for laboratory power supplies and experimental setups, blue. Suitable for low voltages below 50 VAC and 120 VDC up to a maximum of 10A.

€2.75*