«PeakTech® P 2675» Isolationsmessgerät Analog, 250/500/1000 V
€198.50*
Dieses analoge Isolationsmessgerät wird für diverse Messungen von Leitungen, Bauteilen und derer Isolation benötigt. Mithilfe des Drehschalters kann die Spannung, welche zur Isolationsmessung benötigt wird, eingestellt werden. Durch drücken des Test Knopfes wird die eingestellte Spannung ausgegeben und das zu messende Gerät / Leitung wird überprüft. Um eine Messung dauerhaft durchzuführen, ohne den Knopf gedrückt halten zu müssen, kann der Test Knopf beim betätigen gedreht werden. Bei der Funktion der Isolationsmessung können drei Spannungswerte ausgewählt werden, um ein großes Spektrum an Testarten abzudecken.
Des Weiteren können mit dem PeakTech 2675 Wechselspannnungen und Wiederstände gemessen werden, wodurch dieses Gerät für den Professionellen aber auch für den Ausbildungsbereich optimal geeignet ist.
«PeakTech® P 2680 A» Insulation measuring device 500 V ... 5 kV/1TΩ
€599.90*
The PeakTech 2680 A is a high voltage insulation measuring device which can generate and output a test voltage of up to 5,000V. With the insulation measurement, lines or insulation of electrical equipment can be checked and defective ones can be identified. The respective sockets on the test device are marked for connection in order to prevent the device under test from being mixed up or incorrectly connected. The measuring functions can be set quickly using the selector switch and the pushbuttons. The insulation measuring device is built into a sturdy carrying case, which also protects it from splash water and external influences. With the new additional functions PI (polarization index) and DAR (dielectric absorption ratio) the application possibilities of the PeakTech 2680 A grows contrary to its predecessor. Due to its functions and high measuring ranges, the PeakTech 2680 A is ideal for everyday use in electrical engineering, as it can be used in almost every area in which insulation measurement is required.
«PeakTech® P 2685 A» Insulation measuring device 1000 V ... 10 kV/2TΩ
€729.90*
The PeakTech 2685 A is a high voltage insulation measuring device which can generate and output a test voltage of up to 10,000V. With the insulation measurement, lines or insulation of electrical equipment can be checked and defective ones can be identified. The respective sockets on the test device are marked for connection in order to prevent the device under test from being mixed up or incorrectly connected. The measuring functions can be set quickly using the selector switch and the pushbuttons. The insulation measuring device is built into a sturdy carrying case, which also protects it from splash water and external influences. With the new additional functions PI (polarization index) and DAR (dielectric absorption ratio) the application possibilities of the PeakTech 2685 A grows contrary to its predecessor. Due to its functions and high measuring ranges, the PeakTech 2685 A is ideal for everyday use in electrical engineering, as it can be used in almost every area in which insulation measurement is required.
«PeakTech® P 2695» Insulation tester 125/250/500/1000 V /4000 MΩ
€169.90*
This digital insulation measuring device is required for various measurements of lines, components and their insulation. The required voltage for the insulation measurement can be set using the rotary switch. By pressing the test button, the set voltage is output and the device / line to be measured is checked. Four voltage values can be selected for the insulation measurement function to cover any type of test.
Other functions of the PeakTech 2695 are, for example, DC, AC voltage and resistance measurement. In order to ensure safe working, there is a locking button, which prevents the device from outputting a voltage of up to 1000V by accidentally pressing a button.
«PeakTech® P 4395» 2 in 1 DMM/insulation Tester, 250/500/1000 V
€259.50*
Multifunction measuring device with integrated protective frame consisting of an automatic digital multimeter and insulation meter, ideal and indispensable for use in electrical installation work. The 3 3/4-digit, 23 mm LCD display (max. 3999) with function symbols and background lighting ensure simple and precise measurement data acquisition. Measurements of DCV, ACV, DCA, ACA, Ohm, Freq., Diode test, continuity test function and insulation tests acc. VDE-0413, Part 1 are special features.